Recovery Solutions for Computer Data and Software

My Basket Total: €0.00

Proceed To Checkout

RSCDS Driver Detector

The RSCDS driver detector system is compatible with, but not limited to all the following 32 & 64 Bit operating systems

This driver detection system will find all the drivers for any windows based computer and all connected hardware.

1. Once the correct driver detector version has been download, DriverDetector.exe (32 bit) or DriverDetectorInstall.msi (64 bit), double click to execute the installer. Once installed, the program will ask you to click the finish button to “start now”.
2. At this stage a few dialog boxes will be displayed asking a series of questions, set out below, this is to ascertain many aspects of the driver install system.
3. If the driver detector program is being used on the computer that the drivers are required for then the procedure is very straight forward.
   
4. Is the computer connected to the internet?
   
5. At this point the driver detector systems will double check that there is a connection to the driver detector servers.
   
6. After pressing next, driver detector will scan your system (the results of which you can choose to view) and submit the results to the driver detector servers. These scan results consist of a complete list of all the hardware connected to your computer. Any and every device connected to the computer would be detected with the correct driver matched to work with any windows operating system!
   
7. Using the next dialog box the device scan results can be viewed and or saved for later use.
   
8. Press “Start” to move the process on to the next step where the selection of Manufacturer and operating system is required.
9. ** Please note ALWAYS select “OEM” even if your machines manufacturer is listed on the dropdown. This part of the program can be re run as many times as required. Only select your manufacturer if the default of “OEM” does not find all of the drivers or there are some areas on the results page highlighted in red.
   
   
10. A complete or partial match will be presented both results are shown below Complete Driver Match
    
    Incomplete Driver Match
    
11. To create a driver disk press “NEXT” then log into an existing account or create a new one. If the driver detector system did not produce a 100% complete driver match for all devices the resulting disk would be half price.
    
12. Once the account has been verified or the disk paid for the drivers will start downloading.
    
13. Driver detector has built in CD and DVD writing software so to burn to a CD or DVD pres the “BURN DISK” button.
14. If you wish to browse the disk or execute and install all the drivers without burning a disk select the “BROWSE DISK” button and then double click the “SPLASH” or splash.exe icon shown here by the green arrow.